COOLSIGA
ThunderResin High Speed&Washable Photopolymer Resin
ThunderResin High Speed&Washable Photopolymer Resin
Couldn't load pickup availability
Basic Perfermance
Properties |
Unit |
Result |
|
Hardness |
Shore D | 83-86 |
| Shrinkage | % | 3-5 |
| Viscosity | Cps | 235-300 |
| Elongation at Break | % | |
| Tensile Strength | Mpa | 38-45 |
Notes
1.Thoroughly rinse your 3D printed model with running water for at least 30 seconds.
2.If the resin comes into contact with your skin, wash the affected area immediately with water and seek medical attention if an allergic reaction occurs.
3.Wear gloves and a mask when handling the resin to avoid skin contact.
4.Before using the resin, be sure to shake the bottle well and keep it away from direct sunlight.
5.After use, cover any remaining resin in the vat and ensure adequate indoor ventilation.
6.Do not consume the resin, and keep it out of reach of children.
Time and Cost Savings
Given that high-speed water-washable materials can be quickly and easily cleaned with water, this significantly reduces the cleaning time, thereby enhancing production efficiency. Additionally, by cutting down on the time and other resources required for cleaning, production costs can also be lowered.
Environmentally Friendly
Compared to traditional materials that require harmful chemicals or solvents for cleaning, high-speed water-washable materials only need water. This reduces the usage and discharge of harmful chemicals, contributing to environmental protection.
Improved Product Quality
High-speed water-washable materials ensure a more uniform and consistent cleaning result, elevating the final product's quality. Moreover, with the reduced likelihood of residual chemicals, the safety and durability of the product might also be enhanced.